Single-stage standard Peltier module QC-241-1.6-15.0AS silicone sealed
Cycles = appr. 20.000, Tmax = 100°C
Direct current through the module at ∆Tmax: Imax (A)= 13,6
Voltage applied to the module at ∆Tmax: Umax (V)= 26,7
Cooling capacity on the cold side of the module at ∆Tmax = 0 ° C: Qcmax(W)= 204,8
Temperature difference between the cold and the warm side of the module when the cooling capacity on the cold side is zero: ΔTmax(K)= 67
Dimensions length X width warm side: 50x54 mm
Dimensions length X width cold side: 50x50 mm
Dimension height / thickness: 3,8 ± 0,2 mm
Data sheet cooling operation
No stock goods: delivery time and other priceson request
Peltier Modules can be printed with PCM thermal paste directly from us. More information on our PCM info page.
The electrical power to be supplied by a Peltier module increases disproportionately with increasing cooling power. It can therefore be advantageous to replace a maximally controlled module with several partially utilized modules. This reduces the total energy consumption and the demands on the downstream heat sink.
Do you have questions or need more information? Our experts will be happy to assist you personally.
General questions & sales: Katja Hermes
+49 (0) 202 - 40 43 22
Technical questions: Werner Jonigkeit
+49 (0) 202 - 40 43 26
Unless shown individually, the following versions are also possible: