Single-stage "Standard" Peltier module
QC-241-1.4-8.5A not sealed

Cycles = appr. 20.000, Tmax = 100°C

Technical specifications:

Direct current through the module at ∆Tmax: Imax (A)= 8,7

Voltage applied to the module at ∆Tmax: Umax (V)= 27,3

Cooling capacity on the cold side of the module at ∆Tmax = 0 ° C: Qcmax(W)= 138,1

TTemperature difference between the cold and the warm side of the module when the cooling capacity on the cold side is zero: ΔTmax(K)= 71

Dimensions length X width warm side: 54,4x57 mm

Dimensions length X width cold side: 54,4x57 mm

Dimension height / thickness: 3,4 ± 0,2 mm

RoHS Compliant

Comprehensive details and information as a PDF file

No stock goods: delivery time and other prices on request

To save time!

Peltier Modules can be printed with PCM thermal paste directly from us. More information on our PCM info page!

Save energy!

The electrical power to be supplied by a Peltier module increases disproportionately with increasing cooling power. It can therefore be advantageous to replace a maximally controlled module with several partially utilized modules. This reduces the total energy consumption and the demands on the downstream heat sink.

Do you have questions or need more information? Our experts will be happy to assist you personally!

General questions & sales: Katja Hermes

+49 (0) 202 - 40 43 22

Technical questions: Werner Jonigkeit

+49 (0) 202 - 40 43 26

Unless shown individually, the following versions are also possible:

Standard-Peltier-Modules (approx 20.000 cycles, Tmax = 100°C)

sealing:

A = without (on request)

AS = silicone (in stock)

AX = epoxy (on request)

Premium-Peltier-Modules (approx 800.000 cycles, Tmax = 200°C)